TP-Link TL-WA860RE TL-WA860RE V1 UG 1910011037 - Page 19
TL-WA860RE, Security Type, Modify, Connect, Delete All, To add a profile, Profile Name, Root SSID
View all TP-Link TL-WA860RE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
TL-WA860RE 300Mbps WiFi Range Extender with AC Passthrough ¾ Security Type - the security type of your root device. ¾ Modify - You can Edit or Delete the profiles. Click Connect to connect the range extender to the wireless network that you have chosen in the profile list. Click Add to add a new profile to the list. Click Delete All to delete all the information in the profile list. To add a profile: 1. Click Add in the Profile list page as shown in Figure 4-2. 2. Configure the required parameters (as shown in Figure 4-3), including name your profile, enter the SSID of your root device (a wireless router or AP) and its MAC address, select the security type of your root device and also enter the wireless password. Then click to Save your profile. Figure 4-3 Add or Modify the Profile z Profile Name - The name you give to your wireless networks. By default, it's the same as root SSID, but you can change it to any other names that you can easily remember and distinguish. z Root SSID - The wireless network name of your root AP this profile will connect to. z MAC of Root Device - The MAC of your root device this profile will connect to. z Wireless Security - The security type of your root wireless networks this profile will refer to. Please make sure it's the same as the root AP's. z Wireless Password - The wireless password of your root AP. Please make sure it's the same as your root AP. Click Save to save this profile in the profile list and go back to the Profile List page. Click Back to go back to the Profile List page, without saving any configuration on this page. 3. After you've set and saved the profile, it will return to the profile list page and display as in Figure 4-4. Figure 4-4 Add or Modify the Profile 12