TP-Link TL-WPA4226T KIT TL-PA4020P V1 User Guide - Page 10

TL-PA4020P AV500 2-port Powerline Adapter with AC Pass Through Ethernet LED Solid Blinking Off At least one Ethernet port is connected, but there is no data being transferred. At least one Ethernet port is transferring data. No Ethernet port is connected. ) Note: 5 minutes after the device connected to the adapter is turned off, and the adapter will automatically switch to the power-saving Mode. In power-saving mode, the Homeplug cannot be accessed via the electrical wiring, but its integrated electrical socket can supply the power normally. After the device connected to the Homeplug is switched on again, your Homeplug will leave the power-saving mode and the three LEDs will flash simultaneously. 1.4 Physical Interface There are four physical interfaces on this Powerline Adapter. Integrated Electrical Socket Power Plug Pair Button Ethernet Port Interface Description Ethernet Port It is a 10/100Mbps Ethernet port on the adapter for connecting it to the PC or the broadband device with the network cable. Power Plug* A Power Plug connected to any (100V-240V~, 50/60Hz) power socket Pair Button Pair buttons are used to secure a powerline network. To secure your network, please follow the steps below. Firstly, plug in a new adapter, and press its pair button for 1 second; then plug in another adapter and press its pair button for 1 second as well. The two buttons should be pressed within 2 minutes of each other. After that, wait about 60 seconds so that the two adapters can finish connecting. Integrated Electrical Socket The integrated electrical socket allows additional devices or multiple sockets to be connected to the adapter just like to a normal wall socket. No electrical socket is lost. * The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version as an example. 4