TRENDnet TEG-082WS User's Guide - Page 11
System MAC Address, IPv4 Information, Link Local Address - firmware
View all TRENDnet TEG-082WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TRENDnet User's Guide Switch Information System Up For: The duration your switch has been running continuously without a restart/power cycle (hard or soft reboot) or reset. Runtime Image: The current software or firmware version your switch is running. Boot Loader: The current boot loader version your switch is running. Hardware Information DRAM Size: Displays your switch RAM memory size. Flash Size: Displays your switch Flash memory size. Administration Information System Name: Displays the identifying system name of your switch. This information can be modified under the System section. System Location: Displays the identifying system location of your switch. This information can be modified under the System section. System Contact: Displays the identifying system contact or system administrator of your switch. This information can be modified under the System section. System MAC Address, IPv4 Information MAC Address: Displays the switch system MAC address. IP Address: Displays the current IPv4 address assigned to your switch. Subnet Mask: Displays the current IPv4 subnet mask assigned to your switch. TEG-082WS Default Gateway: Displays the current gateway address assigned to your switch. IPv6 Information IPv6 Unicast Address / Prefix Length: IPv6 Default Gateway: Link Local Address / Prefix Length: Displays the current IPv6 address and prefix assigned to your switch. Displays the current IPv6 default gateway address assigned to your switch. Displays the current Link Local address and prefix length assigned to your switch. Automatic Network Features IPv4 DHCP Client Displays if your switch IPv4 address setting is set to Mode: DHCP client. IPv6 DHCP Client Displays if your switch IPv6 address setting is set to Mode: DHCP client. © Copyright 2014 TRENDnet. All Rights Reserved. 10