TRENDnet TEG-082WS User's Guide - Page 88
DHCP Snooping over VLAN, DHCP Snooping > VLAN Settings, Verify MAC, Address, Enabled, Disabled, Backup
View all TRENDnet TEG-082WS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
TRENDnet User's Guide Verify MAC Address: Backup Database: Database Update Interval: DHCP Option 82 Insertion: Select one of the following choices from the pull-down menu: Enabled: The MAC address of each ingress ARP packet is validated when compared against the Binding Table entries. Invalid ARP packets are discarded. Disabled: The MAC address of each ingress ARP packet is not validated against the Binding Table. All ARP packets are forwarded through the switch without regard to the IP and MAC Address information in the packet header. select one of the following choices from the pull-down menu: Enabled: The Web Management Utility Software saves a backup copy of the Binding Table to flash at a specified interval (Database Update Interval) of time. Disabled: The Web Management Utility Software does not save a backup copy of the Binding Table to flash. Enter the database update interval. The range of this interval is 600 to 86400 seconds. select one of the following choices from the pull-down menu: Enabled: The Web Management Utility software inserts the DHCP Option 82 information into the DHCP packets. Disabled: The Web Management Utility software does not insert the DHCP Option 82 information into the DHCP packets. Go Save Settings to Flash section to save the change on the flash to make sure the change is permanent. © Copyright 2014 TRENDnet. All Rights Reserved. TEG-082WS DHCP Snooping over VLAN DHCP Snooping > VLAN Settings In this section, you can define an existing VLAN to apply DHCP snooping. In the field, enter the existing VLAN ID to apply DHCP Snooping. Then click Add to add the VLAN entry to the table. On the list, you can click Modify to modify an entry or click Delete or delete the entry. You can also click Delete All to delete all of the entries in the table. If the entries span multiple pages, you can navigate page number in the Page field and click Go or you can click First, Previous, Next, and Last Page to navigate the pages. Go Save Settings to Flash section to save the change on the flash to make sure the change is permanent. 87