TRENDnet TEG-082WS User's Guide - Page 97

Firmware Upgrade via TFTP Settings, Backup and restore your switch configuration settings

Get TRENDnet TEG-082WS PDF manuals and user guides View all TRENDnet TEG-082WS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 97 highlights

TRENDnet User's Guide Firmware Upgrade via TFTP Settings Note: Before using this method, a TFTP server is required alive on the network. The TFTP server has to be in the same subnet. Please place the firmware file (.hex) on the root directory of your TFTP server. If you are not familiar with the TFTP protocol, it is recommended to use the HTTP method. TEG-082WS Backup and restore your switch configuration settings Tools > Config File Backup/Restore You may have added many customized settings to your switch and in the case that you need to reset your switch to default, all your customized settings would be lost and would require you to manually reconfigure all of your switch settings instead of simply restoring from a backed up switch configuration file. Backup/Restore via HTTP Settings Firmware Upgrade via TFTP Settings Image Version: The firmware version now is running on the switch. TFTP Server IP: Enter the IP address of your TFTP server. Image File Enter the firmware filename with extension. (.hex) Name: Retry Count: Defined the number of time to attempt to pull the firmware file from the TFTP server. Click Apply to start the firmware upgrade. Click Backup to save the configuration file (config.bin) to your local hard drive. Note: If prompted, choose the location on your local hard drive. If you are not prompted, the configuration file (config.bin) will be saved to your default downloads folder. © Copyright 2014 TRENDnet. All Rights Reserved. 96

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
TRENDnet
User’s Guide
TEG-082WS
© Copyright 2014 TRENDnet. All Rights Reserved.
96
Firmware Upgrade via TFTP Settings
Note: Before using this method, a TFTP server is required alive on the network. The
TFTP server has to be in the same subnet. Please place the firmware file (.hex) on the
root directory of your TFTP server. If you are not familiar with the TFTP protocol, it is
recommended to use the HTTP method.
Firmware Upgrade via TFTP Settings
Image Version:
The firmware version now is running on the switch.
TFTP Server IP:
Enter the IP address of your TFTP server.
Image File
Name:
Enter the firmware filename with extension. (.hex)
Retry Count:
Defined the number of time to attempt to pull the
firmware file from the TFTP server.
Click
Apply
to start the firmware upgrade.
Backup and restore your switch configuration settings
Tools > Config File Backup/Restore
You may have added many customized settings to your switch and in the case
that you need to reset your switch to default, all your customized settings
would be lost and would require you to manually reconfigure all of your
switch settings instead of simply restoring from a backed up switch
configuration file.
Backup/Restore via HTTP Settings
Click
Backup
to save the configuration file (config.bin) to your local hard drive.
Note: If prompted, choose the location on your local hard drive. If you are not
prompted, the configuration file (config.bin) will be saved to your default
downloads
folder.