TRENDnet TEG-PCISX Manual - Page 15
NetWare Server 5.0
View all TRENDnet TEG-PCISX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
NetWare Server 5.0 The following is for the initial installation from the install menu. Skip this section if it is not your first time using the install menu. 1. Start the NetWare Server by typing in the following commands: CD \NWSERVER SERVER 2. After booting up, type the following command: NWCONFIG 3. Select Driver Options → Configure network drivers → Select a driver. 4. Press the key to install an unlisted driver. 5. Insert the driver diskette into the floppy disk drive into your Floppy drive. 6. Press the key to continue the installation or press to specify the directory which includes JT1ODI.LDI, JT1ODI.LAN. For example, A:\NETWARE\32BITLAN (where A: is the floppy drive) 7. Select JT1ODI.LAN .... Note: Don't copy the NLM files to your system if the version of the ones on the installation disk are older than those already on your system. 8. Specify SLOT and Node Address if necessary. 11