TRENDnet TEG-PCISX Manual - Page 18
Parameters supported by the JT1ODI.LAN driver
View all TRENDnet TEG-PCISX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
BIND IPX JT1ODI_1_EII NET=xxxx LOAD C:\NWSERVER\JT1ODI SLOT=1 FRAME=Ethernet_SNAP NAME=JT1ODI_1_ESP BIND IPX JT1ODI_1_ESP NET=xxxx 6. Restart the server again. Parameters supported by the JT1ODI.LAN driver SLOT 1 - Forces the driver to search for the specified card. FULLDUPLEX - The FULL-DUPLEX parameter causes the JT1ODI to operate in full-duplex mode. When operating in full-duplex mode, the JT1ODI can simultaneously transmit and receive packets. AUTONEGOTIATE - The AUTO-NEGOTIATE parameter causes the JT1ODI to auto negotiate the duplex mode and link speed with the device being connected. TXDMATHRESHOLD - The TXDMATHERESHOLD determines the I/O method used to move transmit packets from host memory to the JT1ODI memory. The valid range for the TXDMATHRESHOLD is 0 - 1514. the default value is 800. DISABLERXIP - Disables the JT1ODI TCP/IP Receive Packet checksum support. By default, the JT1ODI will perform TCP/IP checksum verification on received packets in hardware if the operating system supports this capability. Due to the large number of Network Operating Systems (NOSs) supported, detailed driver software installation instructions are given in README.TXT files on the 1000Mbps Gigabit Ethernet Card Software Diskette. 14