TRENDnet TEG-PCISX Manual - Page 20
Troubleshooting
View all TRENDnet TEG-PCISX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Troubleshooting If you experience any problems with the adapter, first confirm that the appropriate driver is loaded; that the proper grade of cable is employed for the network connection; and that the switch it is connected to is properly qualified for the application (such as 1000BASE-SX). The 1000Mbps Gigabit Ethernet Card features four LED indicators: • Link Steady green indicates good linkage between the 1000Mbps Gigabit Ethernet Card and its supporting server or switch. • 1000M The LED indicator lights green when a 1000 Mbps device is connected to the adapter. • FDX Steady green indicates the adapter is operating in Full-Duplex mode. • TX/RX Flashing green indicates activity (transmitting or receiving) on the line. 16
16
Troubleshooting
If you experience any problems with the
adapter,
first
confirm
that
the
appropriate driver is loaded; that the
proper grade of cable is employed for the
network connection; and that the switch it
is connected to is properly qualified for
the application (such as 1000BASE-SX).
The 1000Mbps Gigabit Ethernet Card
features four LED indicators:
•
Link
Steady
green
indicates good linkage
between the 1000Mbps Gigabit Ethernet
Card and its supporting server or switch.
•
1000M
The LED indicator lights
green
when a
1000 Mbps device is connected to the
adapter.
•
FDX
Steady
green
indicates the adapter is
operating in Full-Duplex mode.
•
TX/RX
Flashing
green
indicates activity
(transmitting or receiving) on the line.