TRENDnet TEG-PCITXM2 User Guide - Page 7

Installing the Driver for Windows ME 1. Start up your computer. 2. Windows ME automatically detects the presence of the Gigabit adapter. 3. Insert the Driver Diskette into your floppy drive when the "Add New Hardware Wizard" window appears and click Next. 4. Select Specify the location of the driver (Advanced). Click Next. 5. Select Search for the best driver for your device (Recommended) and check the Specify a location, enter A:\winme (assuming A: drive is the floppy drive), and click Next. 6. Windows is now ready to install the Gigabit Adapter driver. Click Next to continue. 7. Windows will begin copying the driver files to your PC. At this point, the installation may require files from your Windows ME CD-ROM. When this happens, insert your Windows ME CD-ROM into your CD-ROM drive and select CD-ROM drive (on the screen) to load the files. 8. After Windows has finished copying the files, it will prompt you to restart your PC. Remove the diskette and CD-ROM and click YES to restart the PC. Installing the Driver for Windows 2000 1. Start up your computer. You must have administrative rights to perform the installation. 2. The Found New Hardware window appears 3. Insert the Driver Diskette into your floppy drive 4. Select Search for a suitable driver for my device (Recommended) and click Next. 5. At the Locate Driver Files dialog box, select Specify a location, click Next, type A:\win2k and click OK. The Driver file search results dialog box appears. Click Next to continue. 6. At Microsoft's digital Signature window, click YES to continue the installation. 7. Click Finish to complete the driver installation. 5 English