TRENDnet TEW-453APB Quick Installation Guide - Page 3

English QIG 1. Prepare for Installation Thank you for purchasing TRENDnet's TEW-453APB Hot Spot Wireless Access Point. This guide will help you set-up your Access Point quickly and easily. Just follow the step-by-step instructions below, and enjoy the benefits of accessing the Internet without ever being tied down to wires! If you run into problems, please refer to the Troubleshooting section. If you need further technical support, please visit www.TRENDNET.com or call technical support by phone. Verify Package Contents Please make sure you have everything in the box: TEW-453APB TEW-453APB Hot Spot Wireless Access Point Quick Installation Guide Point d'accès sans fil sensible Guide d'installation rapide Drahtloser Access Point für Hotspots Kurzanleitung zur Installation Guía de instalación rápida del punto de acceso inalámbrico Hot Spot Version 03.02.2005 TRENDnet TRENDware, USA What's Next in Networking Copyright ©2005. All Rights Reserved. TRENDware International, Inc. Quick Installation Guide CD-ROM Power Adapter (24V DC, 500mA) Verify Equipment Before setting up the Access Point, you should have the following: 1. A computer with Wired (RJ45) or Wireless network card. 2. TCP/IP protocol installed on the Computer. 3. A web browser such as Internet Explorer (5.0 or higher) or Netscape Navigator (4.7 or higher). 4. A Hub or Switch connecting your existing wired network. 5. An RJ-45 Network Cable for connecting the Access Point to your network switch. 1 English