Home » TRENDnet Manuals » Wireless » TRENDnet TEW-711BR » Manual Viewer

TRENDnet TEW-711BR User Manual - Page 14

Connect additional wired devices to your network, computer or device. - problems

Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

TRENDnet User's Guide Connect additional wired devices to your network You can connect additional computers or other network enabled devices to your network by using Ethernet cables to connect them to one of the available LAN ports labeled 1,2,3,4 on your router. Check the status of the LED indicators (1, 2, 3, or 4) on the front panel of your router to ensure the physical cable connection from your computer or device. Note: If you encounter issues connecting to your network, there may be a problem with your computer or device network settings. Please ensure that your computer or device network settings (also called TCP/IP settings) are configured to obtain IP address settings automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server address settings automatically. TEW-711BR © Copyright 2013 TRENDnet. All Rights Reserved. 11

Section	Page
Product Overview	4
Package Contents	4
Features	4
Product Hardware Features	5
Application Diagram	7
Basic Router Setup	8
Creating a Home Network	8
Router Installation	9
Connect additional wired devices to your network	14
Wireless Networking and Security	15
How to choose the type of security for your wireless network	15
Secure your wireless network	16
Connect wireless devices to your router	18
Connect wireless devices using WPS	19
Basic wireless settings	21
Steps to improve wireless connectivity	23
Advanced wireless settings	24
Access Control Filters	25
Access control basics	25
MAC address filters	25
Domain/URL Filters	26
Protocol/IP filters	27
Firewall rules	28
Advanced Router Setup	30
Access your router management page	30
Set your router date and time	31
Manually configure your Internet connection	31
IPv6 Internet Connection Settings	32
Clone a MAC address	33
Change your router IP address	34
Set up the DHCP server on your router	34
Set up DHCP reservation	35
Enable/disable UPnP on your router	36
Allow/deny VPN connections through your router	36
Allow/deny multicast streaming	37
Identify your network on the Internet	37
Allow remote access to your router management page	38
Open a device on your network to the Internet	38
DMZ	38
Virtual Server	39
Special Applications	41
Add static routes to your router	42
Enable dynamic routing on your router	44
Router Maintenance & Monitoring	45
Reset your router to factory defaults	45
Router Default Settings	45
Backup and restore your router configuration settings	46
Restart your router	48
Check connectivity using the router management page	48
Check the router system information	49
View your router log	50
Configure your router log	51
View your router packet statistics	52
View wireless devices connected to your router	52
Capture packets using the router management page	53
Enable SNMP on your router	53
Router Management Page Structure	54
Technical Specifications	55
Troubleshooting	56

Match case Limit results 1 per page

TRENDnet User’s Guide

TEW-711BR

Connect additional wired devices to your network

You can connect additional computers or other network enabled devices to your

network by using Ethernet cables to connect them to one of the available LAN ports

labeled 1,2,3,4 on your router. Check the status of the LED indicators (1, 2, 3, or 4) on

the front panel of your router to ensure the physical cable connection from your

computer or device.

Note:

If you encounter issues connecting to your network, there may be a problem with

your computer or device network settings. Please ensure that your computer or device

network settings (also called TCP/IP settings) are configured to obtain IP address settings

automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server

address settings automatically.