TRENDnet TEW-711BR User Manual - Page 35

Set up DHCP reservation, Domain Name Optional, Lease Time, Apply, Dynamic DHCP List - port forwarding

Get TRENDnet TEW-711BR PDF manuals and user guides View all TRENDnet TEW-711BR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

TRENDnet User's Guide • Domain Name (Optional) - Specifies a domain name to assign to computers or devices. (e.g. trendnet.com) • Lease Time - Click the drop-down list to select the lease time. Note: The DHCP lease time is the amount of time a computer or device can keep an IP address assigned by the DHCP server. When the lease time expires, the computer or device will renew the IP address lease with the DHCP server, otherwise, if there is no attempt to renew the lease, the DHCP server will reallocate the IP address to be assigned to another computer or device. 4. To save changes, click Apply. Dynamic DHCP List - You can view the list of active lease entries for computers or devices that have been assigned IP addresses automatically from the DHCP server on your router. TEW-711BR Set up DHCP reservation Main > LAN & DHCP Server DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows your router to assign a fixed IP address from the DHCP server IP address range to a specific device on your network. Assigning a fixed IP address can allow you to easily keep track of the IP addresses used on your network by your computers or devices for future reference or configuration such as virtual server (also called port forwarding, see "Virtual Server" on page 36) or special applications (also called port triggering, see "Special Applications" on page 37). 1. Log into your router management page (see "Access your router management page" on page 27). 2. Click on Main, and click on LAN & DHCP Server. 3. Review the DHCP reservation settings. • Static DHCP- Enable or Disable the DHCP reservation feature. • Name - Enter a name for the reservation. • IP Address - Enter the IP address to assign to the reservation. (e.g. 192.168.10.101) Note: You cannot assign IP addresses outside of the DHCP range. The IP address is required to be within the DHCP IP address range (Start IP & End IP). • MAC Address - Enter the MAC (Media Access Control) address of the computer or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC) • Add - Saves the reservation. © Copyright 2013 TRENDnet. All Rights Reserved. 32

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-711BR
32
•
Domain Name (Optional)
– Specifies a domain name to assign to computers or
devices. (e.g.
trendnet.com
)
•
Lease Time
– Click the drop-down list to select the lease time.
Note:
The DHCP lease time is the amount of time a computer or device can keep an
IP address assigned by the DHCP server. When the lease time expires, the computer
or device will renew the IP address lease with the DHCP server, otherwise, if there is
no attempt to renew the lease, the DHCP server will reallocate the IP address to be
assigned to another computer or device.
4. To save changes, click
Apply
.
Dynamic DHCP List
– You can view the list of active lease entries for computers or
devices that have been assigned IP addresses automatically from the DHCP server on
your router.
Set up DHCP reservation
Main > LAN & DHCP Server
DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows
your router to assign a fixed IP address from the DHCP server IP address range to a
specific device on your network. Assigning a fixed IP address can allow you to easily
keep track of the IP addresses used on your network by your computers or devices for
future reference or configuration such as virtual server (also called port forwarding, see
“Virtual Server” on
page 36
) or special applications (also called port triggering, see
“Special Applications” on
page 37
).
1. Log into your router management page (see “Access your router management page”
on
page 27
).
2. Click on
Main
, and click on
LAN & DHCP Server
.
3. Review the DHCP reservation settings.
•
Static DHCP
– Enable or Disable the DHCP reservation feature.
•
Name
– Enter a name for the reservation.
•
IP Address
– Enter the IP address to assign to the reservation. (e.g.
192.168.10.101)
Note:
You cannot assign IP addresses outside of the DHCP range. The IP address is
required to be within the DHCP IP address range (Start IP & End IP).
•
MAC Address
– Enter the MAC (Media Access Control) address of the computer
or network device to assign to the reservation. (e.g.
00:11:22:AA:BB:CC)
•
Add
- Saves the reservation.