TRENDnet TEW-718BRM User's Guide - Page 18
Connect wireless devices to your router, WPA, WPA / WPA2, or WPA2 Wi-Fi Protected Access Extensible
View all TRENDnet TEW-718BRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
TRENDnet User's Guide Selecting WPA, WPA / WPA2, or WPA2: If selecting WPA, WPA / WPA2, or WPA2 (Wi-Fi Protected Access Extensible Authentication Protocol) please review the settings to configure and click Apply to save the changes. EAP (Extensible Authentication Protocol) is also called Remote Authentication Dial-In User Service or RADIUS. Select the Encryption Type o When selecting WPA security, it is recommended to use TKIP. o When selecting WPA / WPA2 security, it is recommended to use AES. o When selecting WPA2 security, it is recommended to use AES. o RADIUS Server IP - Enter the IP address of the RADIUS server. (e.g. 192.168.10.250) o RADIUS Port - Enter the port your RADIUS server is configured to use for RADIUS authentication. Note: It is recommended to use port 1812. o RADIUS Shared Key - Enter the shared key (or shared secret) used to authorize your router with your RADIUS server. TEW-718BRM Connect wireless devices to your router A variety of wireless network devices can connect to your wireless network such as: • Gaming Consoles • Internet enabled TVs • Network media players • Smart Phones • Wireless Laptop computers • Wireless IP cameras Each device may have its own software utility for searching and connecting to available wireless networks, therefore, you must refer to the User's Manual/Guide of your wireless client device to determine how to search and connect to this router's wireless network. See the "Appendix" on page 65 for general information on connecting to a wireless network. © Copyright 2013 TRENDnet. All Rights Reserved. 15