TRENDnet TEW-718BRM User's Guide - Page 6

ADSL WAN Link/Activity LED, LAN 1-4 Link/Activity LEDs - router

Get TRENDnet TEW-718BRM PDF manuals and user guides View all TRENDnet TEW-718BRM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

TRENDnet User's Guide Front View Status ADSL WLAN LED LED LED LAN 1-4 LEDs WPS Button/ Reset Button/ WLAN (On/Off) © Copyright 2013 TRENDnet. All Rights Reserved. TEW-718BRM • Status LED - This LED indicator is blinking green when your modem router is ready and working successfully. If this LED indicator is solid green on or off, your router is not receiving power or ready, or not working properly. • ADSL WAN (Link/Activity) LED - This LED indicator is blinking green when the ADSL status of the modem router is ready to establish connection to your ISP. The LED indicator will turn solid green when the modem router has been properly configured with the settings provided by your ISP and successful ADSL connection has been made to your ISP. This LED indicator will be blink while data is transmitted or received through the ADSL port of your modem router. • WLAN (Link/Activity) LED - This LED indicator is solid green when the wireless is "On" and functioning properly on your modem router. This LED indicator will be blinking while data is transmitted or received by your wireless clients or wireless network devices connected to your modem router. This LED indicator will be off when the wireless functionality of your modem router is disabled. • LAN 1-4 (Link/Activity) LEDs - These LED indicators are solid green when the LAN ports are successfully connected to your wired network devices (which are turned on). These LED indicators will blink green while data is transmitted or received through your modem router's LAN ports. • WPS/Reset/WLAN Button - This button has multiple functions depending on the amount of time it is pushed and released. o WPS (Wi-Fi Protected Setup) - Push and hold this button for 3 seconds and release to activate WPS. Within 2 minutes, push and hold the WPS button on your wireless client device. WLAN LED indicator will blink rapidly to indicate that WPS has been activated. o Reset - Push and hold this button for 15 seconds and release to reset your router to its factory defaults. Status LED indicator will blink rapidly after released to indicate the reset process has started. o WLAN (On/Off) - Push and hold this button for 10 seconds and release to disable or enable the wireless functionality of your modem router. The Status LED will start to blink rapidly and the WLAN LED indicator will turn off (disabled) or turn on (enabled) to indicate the status of the wireless functionality of your modem router. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
3
Front View
•
Status LED
- This LED indicator is blinking green when your modem router is
ready and working successfully. If this LED indicator is solid green on or off,
your router is not receiving power or ready, or not working properly.
•
ADSL WAN (Link/Activity) LED
– This LED indicator is blinking green when the
ADSL status of the modem router is ready to establish connection to your ISP.
The LED indicator will turn solid green when the modem router has been
properly configured with the settings provided by your ISP and successful ADSL
connection has been made to your ISP. This LED indicator will be blink while
data is transmitted or received through the ADSL port of your modem router.
•
WLAN (Link/Activity) LED
– This LED indicator is solid green when the wireless
is “On” and functioning properly on your modem router. This LED indicator will
be blinking while data is transmitted or received by your wireless clients or
wireless network devices connected to your modem router. This LED indicator
will be off when the wireless functionality of your modem router is disabled.
•
LAN 1-4 (Link/Activity) LEDs
– These LED indicators are solid green when the
LAN ports are successfully connected to your wired network devices (which are
turned on). These LED indicators will blink green while data is transmitted or
received through your modem router’s LAN ports.
•
WPS/Reset/WLAN Button
– This button has multiple functions depending on
the amount of time it is pushed and released.
o
WPS (Wi-Fi Protected Setup) – Push and hold this button for
3
seconds and release to activate WPS. Within 2 minutes, push and hold
the WPS button on your wireless client device. WLAN LED indicator
will blink rapidly to indicate that WPS has been activated.
o
Reset – Push and hold this button for
15
seconds and release to reset
your router to its factory defaults. Status LED indicator will blink
rapidly after released to indicate the reset process has started.
o
WLAN (On/Off) – Push and hold this button for
10
seconds and release
to disable or enable the wireless functionality of your modem router.
The Status LED will start to blink rapidly and the WLAN LED indicator
will turn off (disabled) or turn on (enabled) to indicate the status of
the wireless functionality of your modem router.
WPS Button/
Reset Button/
WLAN (On/Off)
WLAN
LED
Status
LED
ADSL
LED
LAN 1-4
LEDs