TRENDnet TEW-718BRM User's Guide - Page 31
Lazy Mode, Then WDS Lazy Mode can be enabled to learn the wireless MAC address of the manually
View all TRENDnet TEW-718BRM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
TRENDnet User's Guide For additional TEW-718BRM / TEW-718BRM5 routers, make sure to disable the DHCP server first on all additional routers and configure the LAN IP address to be different on each router (e.g 192.168.10.2, 192.168.10.3, 192.168.10.4, etc.). You will connect devices to the LAN ports 1-4 only on all additional routers and the WAN port is not used. Then, repeat steps 3-9 for additional TEW-718BRM / TEW-718BRM5 routers you are bridging. TEW-718BRM Lazy Mode - Lazy mode is additional WDS configuration option that helps to simplify setup on to add additional WDS supported devices. At least one device must be manually configured with all WDS and remote wireless MAC address. The secondary WDS device must configure at least the wireless channel and wireless security settings. Then WDS Lazy Mode can be enabled to learn the wireless MAC address of the manually configured WDS device automatically and create the wireless bridge. You can repeat the steps to configure the first modem router and configure the wireless channel, wireless security, and enable lazy mode for enable additional wireless access points or routers that create a bridge to the first modem router. © Copyright 2013 TRENDnet. All Rights Reserved. 28