TRENDnet TEW-740APBO2K Users Guide - Page 8
Primary Product Application, Minimum Installation Requirements - distance
View all TRENDnet TEW-740APBO2K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
TRENDnet User's Guide Primary Product Application The intended purpose and application for this product is to extend network connectivity across long physical distances outside of an area or building that lacks local connectivity using point-to-point wireless bridge capability using 802.11 standards. Essentially, two access points configured in point-to-point bridge capability can connect/link the two physical locations or buildings together through an encryption wireless connection. Although this product supports multiple wireless modes, the basic installation will only cover the primary application of point to point wireless connectivity in WDS (Wireless Distribution System) Bridge Mode using AES encryption for security. TEW-740APBO / TEW-740APBO2K Minimum Installation Requirements Computer with RJ-45 Ethernet port and web browser 4 x RJ-45 Ethernet cables (not included) Phillips screwdriver (not included, for grounding wire installation only) Additional TRENDnet TEW-740APBO H/W: v2.XR N300 directional wireless access point (For TEW-740APBO single unit only, TEW-740APBO2K model includes two preconfigured access points) For wall mounting only (included wall mounting kit for drywall installations only) Power drill/driver 7/16 in (2.75 mm) straight drill bit for hard wood or 3/32 in (2.35 mm) bit for soft wood (for mounting screws) 11/16 in (4.3 mm) straight drill bit for hard wood or 5/32 in (4 mm) bit for soft wood (if required for drywall anchors) Philips driver bit or screwdriver © Copyright 2017 TRENDnet. All Rights Reserved. 5