TRENDnet TEW-740APBO2K Users Guide - Page 80

TRENDnet User's Guide Modify and view your managed AP list AP Control > AP Setup In this section, you can view the currently managed APs, remove APs, reboot, or configure settings such as group assignment, IP address, password and GUI HTTP port. Click AP Control and click on AP Setup. The list displays all of the imported APs to manage. From the managed AP list, you can delete or reboot the APs in the list. To select multiple APs, tick the option under the Device column. For the selected AP entry, click on Setup. You can change the management settings used to access the AP such as AP group assignment, IP address, administrator password. Click Save to apply the changes. TEW-740APBO / TEW-740APBO2K Batch Configuration Settings AP Control > Batch Setup This section allows you to apply configuration change to multiple APs by VLAN group including batch configuration and firmware upgrade. Click AP Control and click on Batch Setup.  VLAN - Select the VLAN group you would like to apply changes. Once selected, the APs part of the selected VLAN group will appear under the Device List. You can check which APs in the list you would like to apply the configuration settings.  Group - Click the drop-down list to select the group name assignment. You can create groups by VLAN under AP Control > Group Setup.  Batch Setup - Click the drop-down list and select which configuration settings to configure and assign to the selected APs. Enter the settings you would like to apply, then click Apply to apply the configuration to the seleted APs. © Copyright 2017 TRENDnet. All Rights Reserved. 77