TRENDnet TV-IP345PI Users Guide - Page 14

Network - firmware

Get TRENDnet TV-IP345PI PDF manuals and user guides View all TRENDnet TV-IP345PI manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

TRENDnet User's Guide System >> Tools NETWORK TV‐IP345PI  Firmware Upgrade: To update the firmware, click "Browse" to select the firmware, then click "Upgrade" to proceed. Please do not disconnect power or Network cable during firmware upgrading.  System Reboot: Click Reboot to reboot the IP camera.  Factory Reset: Click Reset to reset all the settings back to factory default value  Configuration: - Backup: Click Backup to save the configuration to your computer. - Restore: Click "Browse..." to select the configure file from your computer then click Restore to restore all setting © Copyright 2016 TRENDnet. All Rights Reserved. Network >> Network Setting >> IP Address Setting  DHCP: Select this option when your network uses the DHCP server. When the camera starts up, it will be assigned an IP address from the DHCP server automatically.  Static IP: Select this option to type in IP address, subnet mask, gateway, and DNS manually. Default IP address is 192.168.10.30 if the camera doesn't connect with DHCP server. DNS (Domain Name System) translates domain names into IP addresses. Enter the Primary DNS and Secondary DNS that are provided by the ISP. 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
© Copyright 2016 TRENDnet. All Rights Reserved.
12
TRENDnet User’s Guide
TV
‐
IP345PI
System >> Tools
Firmware Upgrade
:
To update the firmware, click “
Browse
” to select the firmware, then click “
Upgrade
”
to proceed. Please do not disconnect power or Network cable during firmware
upgrading.
System Reboot
: Click
Reboot
to reboot the IP camera.
Factory Reset
: Click
Reset
to reset all the settings back to factory default value
Configuration
:
-
Backup
: Click
Backup
to save the configuration to your computer.
-
Restore
: Click "
Browse..."
to select the configure file from your computer then
click
Restore
to restore all setting
NETWORK
Network >> Network Setting >> IP Address Setting
DHCP
: Select this option when your network uses the DHCP server. When the camera
starts up, it will be assigned an IP address from the DHCP server automatically.
Static IP
: Select this option to type in IP address, subnet mask, gateway, and DNS
manually. Default IP address is 192.168.10.30 if the camera doesn't connect with
DHCP server. DNS (Domain Name System) translates domain names into IP
addresses. Enter the Primary DNS and Secondary DNS that are provided by the ISP.