TRENDnet TV-IP345PI Users Guide - Page 5

TRENDnet User's Guide Camera Connectors GPIO Port Speaker Out Microphone In Power Connector Ethernet /PoE Port TV‐IP345PI Installation Hardware Installation Viewing Angle Choose the location where has good angle to shoot the image you expect to see. The motion detection area should also be considered when installing the camera. Manual Pan/Tilt The camera can manual pan/tilt to your desired location.  Power Connector: Connects the power adapter to supply power to the camera if using non‐PoE connection  Microphone In: Connects an external microphone to receive the on‐the‐spot sound where the camera is installed.  Ethernet/PoE Port: Plugs the network cable to connect to your local area network (LAN). If you are using the PoE, you must have the network cable connect to your PoE switch or PoE Injector.  GPIO Port: Connect external device. Please refer to I/O setting paragraph. It's also used for IP camera reset. Please refer to Factory Default paragraph.  Speaker Out: Connects an external audio device (such as the active speaker) to deliver sound via the camera. Waterproofing The camera is designed to be waterproof. However, you need to protect the connectors from water damage. For example, you can tape the junction points of the connectors while you connect the cables or purchase a weatherproof cable/power cord protector. © Copyright 2016 TRENDnet. All Rights Reserved. 3