TRENDnet TW-200 Manual - Page 53
If DHCP is Disabled
View all TRENDnet TW-200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Operation Figure 15: IP Address (Win 95) 3. Click on the radio button to obtain an IP address automati- cally, as shown above. Default Gateway Address This should be left blank. The DHCP server will provide this information. DNS (Domain Name Server) This should be "Enabled" but the fields can be left blank. The DHCP server will provide this information also. If DHCP is Disabled IP Address Each workstation must have a unique IP address. There should be no need to change any existing addresses. Default Gateway Address This value will depend on whether or not you have a router installed on your LAN. 45
Operation
45
Figure 15: IP Address (Win 95)
3.
Click on the radio button to obtain an IP address automati-
cally, as shown above.
Default Gateway Address
This should be left blank. The DHCP server will provide
this information.
DNS (Domain Name Server)
This should be “
Enabled
” but the fields can be left blank.
The DHCP server will provide this information also.
If DHCP is Disabled
IP Address
Each workstation must have a unique IP address. There
should be no need to change any existing addresses.
Default Gateway Address
This value will depend on whether or not you have a router
installed on your LAN.