Tanaka TCG27EBSP Owner's Manual - Page 2

English MEANINGS OF SYMBOLS NOTE: Some units do not carry them. Symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. It is important that you read, fully understand and observe the following safety precautions and warnings. Careless or improper use of the unit may cause serious or fatal injury. Choke - Run position (Open) Choke - Start position (Closed) Read, understand and follow all warnings and instructions in this manual and on the unit. Ignition stop Always wear eye, head and ear protectors when using this unit. Fuel and oil mixture Keep all children, bystanders and helpers 15 m away from the unit. If anyone approaches you, stop the engine and cutting attachment immediately. Be careful of thrown objects. Guaranteed Sound power 4 level Hot surface - Contact with hot surface can cause serious burns. Shows maximum shaft speed. Do not use the cutting attachment min-1 whose max rpm is below the shaft rpm. Gloves should be worn when necessary, e.g., when assembling cutting equipment. Use anti-slip and sturdy footwear. Indicate handle location. Do not attach handle above this point. Indicates cutting attachment guard location for a trimmer head or semi-auto cutting head. Before using your machine • Read the manual carefully. • Check that the cutting equipment is correctly assembled and adjusted. • Start the unit and check the carburetor adjustment. See "MAINTENANCE". Contents WHAT IS WHAT 3 WARNINGS AND SAFETY INSTRUCTIONS ........ 4 SPECIFICATIONS 6 ASSEMBLY PROCEDURES 8 OPERATING PROCEDURES 10 MAINTENANCE 12 TROUBLESHOOTING 16 2