Thermador CIT304GM User Manual - Page 10
Cooking, induction
View all Thermador CIT304GM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Cooking by induction Advantages of induction cooking Proper cookware Ferromagnetic pans Special induction cooking cookware Check the pans with a magnet Improper cookware Characteristics of the pan base No pan or improper size Induction cooking constitutes a radical change in the traditional form of heating, given that the heat is generated directly in the pan. Therefore, it has a number of advantages: D Greater speed in cooking and frying; as the pan is heated directly. D Uses less energy D Greater convenience and cleanliness; food spilled on the cooktop surface will not burn. D Cooking control and safety; The cooktop heats up or cools down immediately after the controls are set. The induction cooktop also stops supplying heat if the pan is removed without first turning off the power. Only ferromagnetic pans are suitable for induction cooking. These can be of : S enameled steel S cast iron S special stainless steel utensils for induction cooking. There is another type of special cookware for induction cooking with a base that is not entirely ferromagnetic. Check the diameter. It could affect both the detection of the cookware as well as the results of the cooking. Check that the bases of your pans are attracted by a magnet to find out if they are suitable. The manufacturer normally indicates if pans are suitable for induction cooking. Never use pans made of: S thin normal steel S glass S clay S copper S aluminum The characteristics of the pan base can influence the evenness of the cooking. Pans made out of materials that diffuse heat, such as pans with a "sandwich" of stainless steel, spread heat uniformly, saving time and energy. If no pan is placed on the selected element, or it is not of a suitable size, the cooking element shown on the element indicator will flash. It will stop flashing once a suitable pan is placed on the element. If you take longer than 90 seconds to place a suitable pan on the element, it will automatically turn off. 11