Thermador CIT365YB Instructions for Use - Page 14
PowerManager function
View all Thermador CIT365YB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
en-us Operation Display Function Power management function. Limiting the to- tal power of the cooktop. The available set- tings depend on the maximum power of the cooktop. - Deactivated1, 2 - 1.000 W minimum power - 1.500 W ... - 3.000 W recommended for 13 A . - 3.500 W recommended for 16 A - 4.000 W . - 4.500 W recommended for 20 A ... or . - Maximum power of the cooktop2 Time for setting a cooking zone after selection - Unlimited: The last selected cooking zone remains selected. You can adjust the settings without having to select it again. - Limited: You can adjust the settings for the selected cooking zone within 10 seconds. After 10 seconds you have to select the cooking zone again. Results for suitability test for cookware - Not suitable. - Not ideal. -Suitable. Restore factory settings - Off1 - Restore appliance to factory settings 1 Factory setting (may vary according to model) 2 The cooktop's maximum power output is shown on the rating plate Changing the basic settings Requirement: The cooktop is turned off. 1. Turn on the cooktop. 2. Within the next 10 seconds, press TIMER for about 4 seconds. The first four displays provide the product information. To call up the individual displays, touch the control panel. Product information Customer Support index (CI) Production number Production number 1 Production number 2 Display . 3. Press TIMER to access the basic settings. a In the left display and flash alternately. a In the timer display lights up. 4. Press TIMER repeatedly until the desired setting lights up in the left display. 5. Set the desired option in the settings area. 6. Press TIMER for about 4 seconds. a The setting is saved. Tip: Press ON I OFF to leave the basic settings and turn off the cooktop. 6.10 PowerManager function You can use the PowerManager function to set the total power of the cooktop. The cooktop is set at the factory; the cooktop's maximum power is shown on the rating label. You can use this function to adjust the configuration to the requirements of each electrical installation. In order to not exceed this set value, the cooktop automatically distributes the available power as needed between the cooking zones that are switched on. While the PowerManager function is activated, the output of a cooking zone may temporarily fall below the nominal value. In order to not exceed this set value, the cooktop automatically distributes the available power as needed between the cooking zones that are switched on . The appliance regulates and selects the highest power level automatically. For more information, go to → "Basic settings", Page 13 14