Thermador CIT367XM Instructions for Use - Page 9
TROASTERT - Roaster
View all Thermador CIT367XM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
If the only element being used is the flexible cooking zone, larger cookware that is particularly suited to this zone can be used. You can read more information on the positioning of the cookware here Properties of the base of the cookware The material(s) of which the base of the cookware is made can affect the cooking result. Using pots and pans made from materials that distribute heat evenly through them, such as stainless-steel pans with a three-layer base, saves time and energy. Use cookware with a flat base; if the base of the cookware is uneven, this may impair the heat supply. Some induction cookware does not have a fully ferromagnetic base: ▯ If the base of the cookware is only partially ferromagnetic, only the area that is ferromagnetic will heat up. This may mean that heat will not be distributed evenly. The non-ferromagnetic area may not heat up to a sufficient temperature for cooking. ▯ The ferromagnetic area will also be reduced if the material of which the base of the cookware is made contains aluminum, for example. This may mean that the cookware will not become sufficiently hot or even that it will not be detected. Pans specifically suited for use with the Liberty™ cooking zone can be purchased as an optional accessory from specialist retailers, online at the THERMADOR® eShop or from Customer Support. Order the relevant reference number: ▯ TEPPAN1013 - Teppan yaki (small) ▯ TROASTERT - Roaster Unsuitable cookware Do not ever use adapter plates for induction or cookware made of: ▯ Traditional stainless steel ▯ Glass ▯ Clay ▯ Copper ▯ Aluminum No pan or improper size If no pan is placed on the selected element, or if it is made of unsuitable material or is not the correct size, the power level displayed on the element indicator will flash. Place a suitable pan on the element to stop the flashing. If you take longer than 90 seconds to place a suitable pan on the element, it will automatically turn off. Empty pans or pans with a thin base Do not heat up empty pans, or use pans with a thin base. The cooktop is equipped with an internal safety system. However, an empty pan may heat up so quickly that the "automatic shut-off" function may not have time to react, and the pan may reach very high temperatures. The pan base could melt and damage the cooktop glass. In this case, do not touch the pan and switch the cooktop off. If the cooktop fails to work after it has cooled down, please contact Customer Support. Pan detection Each element has a lower limit for pan detection. This depends on the diameter of the ferromagnetic area of the cookware and the material of which its base is made. For this reason, you should always use the element that best matches the diameter of the base of the pan. 9