Thermador CIT367XMS Installation Instructions - Page 7
Installation Procedure
View all Thermador CIT367XMS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
▯ An opening at the top to the rear of the cabinet. PLQ ▯ If the inside of the cabinet is no wider than 29 1/2 inch (750 mm), make cutouts in the side panels. PLQë PLQ PP ▯ If the minimum clearance of 13/16 inch (20 mm) is not provided at the rear of the cabinet, you must create an opening on the underside. PP Note: If the appliance is installed in an island unit or another installation that is not described here, you must ensure that the cooktop is sufficiently ventilated. PLQ PP Installation Procedure InstalionPrcedu 9 CAUTION Sharp edges. Use protective gloves when installing the cooktop. Note: The appliance is heavy. It is advisable to install it with a second person. Installing the heat shield 9 CAUTION Sharp edges. Use protective gloves when installing the plate. For safety reasons, the heat shield must be properly installed when closed cabinets are used. This prevents components from overheating as a result of the recirculation of hot air from the cooktop. The heat shield is the same width as the cooktop. For shipping, it is screwed to the bottom of the burner box. After unpacking the cooktop, unscrew the heat shield. The heat shield will be able to rotate freely, as shown in the illustration. 7