Thermador MC30WS Installation instructions - Page 8

Dimensions and Cabinet Requirements General Cabinet Requirements ▯ A space of ¼" (6.4 mm) is required between the side of the appliance and an adjacent wall or cabinet door when installed at the end of a cabinet run. ▯ The cabinet base must be flat and capable of supporting the weight of your appliance when in use. For combination units consult the section Cabinet Dimension Requirements in the installation manual of your combination appliance. ▯ The appliance door will overlap the furniture below by approx. 3/16" (5 mm) when opened. If necessary, you can elevate the appliance position by adding a panel in the required thickness on top of the supporting base. The supporting base must be level and securely fixed to the cabinet. Outlet Area Anywhere within the shaded area the minimal distance between the appliance and the wall is 1¾ in (45 mm). ▯ For stand alone installation, the electrical connection box must be mounted to the wall inside the cabinet cavity anywhere within the shaded area. ▯ For installation as part of a combination of various THERMADOR appliances, please consult the installation manual of the combination unit.  PP  PP Appliance Dimensions ë    ʌ¼ʚ  Cabinet Dimensions Wall installation ê  é      PP NOTICE: The cabinet base must be flat and capable of supporting a weight of at least 142 lbs (64.1 kg). Under counter installation   é  ê    ¼  ç¼ʚ  ç¼ʚ  ë    PP 8