Thermador PH36GWS Installation instructions - Page 6

Advanced Planning Before You Begin  CAUTION Before installing, turn power OFF at the service panel. Lock service panel to prevent power from being turned ON accidentally. Parts included • Metal transition with backdraft damper • Stainless steel baffle filters • Stainless steel grease trays • Stainless steel filter spacers • Heat lamps (on PHxxGWS models) • Blower adapter • Wood support bracket used as hood mounting bracket (part of install- DO NOT THROW AWAY) • Fastener assortment* * Hardware provided is for mounting through standard thickness drywall or plaster into wood studs. Installers are responsible to provide hardware for other types of mounting situations. Optional accessories available for separate purchase Refer to www.thermador.com for more details. • DC***W - 6 in. tall Duct Cover • DC**TW - 20 in. - 54 in. Telescoping Duct Cover • REMCPW - Remote Control Panel • EXTNCB25W - 25 ft. Remote and Inline Blower Extension Cable • WC8 - 8" Wall Cap • WC10 - 10" Wall Cap • RFPLT600P - Roof plate for use with 600 CFM Remote Blower VTR630 • RFPLT1000P - For use with 1000 CFM Remote Blower VTR1030 and 1300 CFM Blower VTR1330 Tools and Parts Needed • Blower (refer to the Ventilation Planning Guide for compatible blowers) • Ducting as needed (refer to Equivalent Duct Lengths for Commonly Used Transitions Table) • Aluminum tape (DO NOT use duct tape.) • 1/2'' (13 mm) Conduit if required (follow local codes) • 1'' (25.4 mm) Strain relief • Phillips screwdriver • T-20 Torx head screwdriver • Drill with 3/16'' (4.76 mm) drill bit • 11/32'' nut driver or socket and ratchet • Circular saw or jigsaw • Tape measure • Protective work gloves IMPORTANT: DO NOT throw away any packaging until appliance is fully installed. Page. 6