Thermador PRD606RESG Product Specs - Page 5
with Flush Island Trim
View all Thermador PRD606RESG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
PRD606RESG 60-INCH DUAL-FUEL PRO GRAND® RANGE WITH STEAM AND DOUBLE GRIDDLE PROFESSIONAL SERIES, COMMERCIAL-DEPTH, PORCELAIN COOKTOP SURFACE Installation Clearances with Flush Island Trim 60-INCH RANGE DIMENSIONS AND CLEARANCE REQUIREMENTS WITH "FLUSH ISLAND TRIM" Combustible Materials 36" (914 mm) min. to combustible materials 12"" (305 mm) min. to combustible surface with Flush Island Trim Shaded area behind range indicates minimum clearance to combustible surfaces, combustible materials cannot be located within this area. 357/8" (911 mm) Min. 36¾" (933 mm) Max. 31¼" (794 mm) 291/8" (740 mm) 251/8" (638 mm) max. recess depth For Flush Island Trim installations, counter surface should have a cantilever edge meeting the back section of the Flush Island Trim accessory. Combustible Back Wall If an inner wall is used under the cantilever counter top, there should be a 1/8" (3 mm) gap from the rear of the range to the inner wall. 267/8" (683 mm) 48¾" (1238 mm) As defined in the "National Fuel Gas Code" (ANSI Z223.1, Current Edition). Clearances from non-combustible materials are not part of the ANSI Z21.1 scope and are not certified by CSA. Clearances of less than 12" (305 mm) must be approved by the local codes and/or by the local authority having jurisdiction. These warranties give you specific legal rights and you may have other rights that vary from state to state. Full warranty and limited warranty from date of installation. For complete warranty details, refer to your Use & Care manual, or ask your dealer. Specifications are for planning purposes only. Refer to installation instructions and consult your countertop supplier prior to making counter opening. Consult with a heating and ventilation engineer for your specific ventilation requirements. For the most detailed information, refer to installation instructions accompanying product or write to Thermador indicating the model number. Specifications are correct at time of printing. Thermador reserves the right to change product specifications or design without notice. Some models are certified for use in Canada. Thermador is not responsible for products that are transported from the U.S. for use in Canada. 1 800 735 4328 | USA THERMADOR.COM | CANADA THERMADOR.CA | ©2015 BSH HOME APPLIANCES CORPORATION. ALL RIGHTS RESERVED. Page 5 of 5 01 / 16