Thermador SGSX365TS Installation instructions - Page 8

Note: All measurements given must be precisely followed. If nonstandard cabinets are used, make sure they are installed with minimum dimensions shown in image above. Plan the installation of the unit so that the power cord, gas shut-off valve and gas pressure regulator are accessible from the front of the cabinet. Countertop Requirements Notes ▯ All measurements given must be precisely followed. If nonstandard cabinets are used, make sure they are installed with minimum dimensions shown in image below. ▯ When installed in combination with a hood, refer to hood manufacturer's requirements for installation 30" Models 36" Models gas connection gas connection max. 3″ (76) ( )=mm * Side wall clearance dimensions can be reduced to 6" (152 mm) if opposing side wall is ≥ 24" (610 mm). Mounting Requirements Use the hold down brackets supplied. See "Install the Cooktop" section for further details. Ventilation Requirements We strongly recommend the installation of ventilation with the appliance. The appliance must be installed according to the furnished instructions. max. 3″ (76) ( )=mm * Side wall clearance dimensions can be reduced to 6" (152 mm) if opposing side wall is ≥ 24" (610 mm). 9 CAUTION The appliance should not be installed with a ventilation system that blows air downward toward the burners. This type of ventilation system may cause ignition and combustion problems with the gas cooking appliance resulting in personal injury or unintended operation. 8