Thermador VCI29CS User Manual - Page 7
Maintenance
View all Thermador VCI29CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Cleaning Chart Maintenance Lights Light Bulb Replacement Cleaning and Maintenance Table 1: Cleaning Chart Part or Surface Plastic (Buttons) Stainless Steel Glass Suggested Technique Notes Wipe with sudsy water or household cleaners such as Fantastic or Formula 409, rinse well and dry with a clean soft cloth to avoid water marks. Wipe and dry stainless steel in the same direction as the grain. Avoid using too much pressure, which may mar the surface. To remove finger prints and give added shine, use cleaners such as Stainless Steel Magic. Do not allow any cleaning compounds to remain in contact with stainless steel for extended periods. Use warm soapy water and/or a mild window cleaner. CAUTION: Turn power off at breaker before removing a damaged bulb. Do not touch the bulbs immediately after use. The bulbs will remain hot for several minutes. • WARNING: Make sure the appliance and lights are cool and power to the appliance has been turned off before replacing the light bulb(s). Failure to do so could result in electrical shock or burns. • The lenses (if equipped) must be in place when using the appliance. • The lenses (if equipped) serve to protect the light bulb from breaking. • The lenses (if equipped) are made of glass. Handle carefully to avoid breaking. Broken glass could cause an injury. Use a 12V halogen bulb (max. 20Watt) with a two pin, G4 base. Note: DO NOT touch a new halogen bulb with your fingertips. Grasp the bulb through a clean paper towel or facial tissue. The oils from your skin can reduce the longevity of the bulb. English 5