Thermador WD30EP Design Guide - Warming Drawers - Page 12
Installation Options
View all Thermador WD30EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
WARMING DRAWERS INSTALLATION OPTIONS WALL-MOuNTED INSTALLATION Thermador Warming Drawers may be installed below any Thermador Single or Double Built-in Oven. A minimum space of 1" is recommended between the bottom of the oven and the top of the warming drawer. Refer to the built-in oven section for additional details. uNDER-COuNTER INSTALLATION Thermador Warming Drawers may also be installed below any Thermador Electric or non-professional Gas Cooktop as long as there is no contact between the bottom of the cooktop and the top of the warming drawer. When installing below a Thermador Induction Cooktop, a minimum 1" air gap must be maintained between the bottom of the cooktop and the top of the warming drawer. When installing below a Thermador Professional Rangetop, a minimum 2 3/4" air gap must be maintained between the bottom of the cooktop and the top of the warming drawer. Refer to the appropriate cooktop or rangetop section for additional details. FRONT PANEL This Thermador Warming Drawer requires a front panel. You may choose from one of our coordinating front panel accessories or build a custom drawer front panel to coordinate with your cabinetry. Custom panels must meet the following requirements: - Have a handle - Have the dimensions shown below - Have a minimum thickness of 3/4" (19 mm) - Have all edges finished - Be capable of withstanding a temperature of 158°F (70° C) The cabinet base must be flat and capable of supporting a weight of at least 150 lbs. (75 kg). CUSTOM FROnT PAnEL WARMING DRAWER 36-INCH CONVECTION Model: WDC36E 36-InCH COnVECTIOn WARMInG DRAWER AnD CUTOUT DIMEnSIOnS 1" minimum space is recommended between the bottom of the oven and the top of the Warming Drawer, if the Warming Drawer is installed below a single oven. 24" 10" 34 1/2" 22 3/4" 35 3/4" 22" 11 1/4" 1.800.735.4328 | THERMADOR.COM 199