Thermador WD30EP Design Guide - Warming Drawers - Page 6
Warming Drawers, Warming Drawer
View all Thermador WD30EP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
WARMING DRAWERS INSTALLATION OPTIONS WALL-MOUNTED INSTALLATION Thermador Warming Drawers may be installed below any Thermador Single or Double Built-in Oven. A minimum space of 1" is recommended between the bottom of the oven and the top of the warming drawer. Refer to the built-in oven section for additional details. UNDER-COUNTER INSTALLATION Thermador Warming Drawers may also be installed below any Thermador Electric or Non-professional Gas Cooktop as long as there is no contact between the bottom of the cooktop and the top of the warming drawer. When installing below a Thermador Induction Cooktop, a minimum 1" air gap must be maintained between the bottom of the cooktop and the top of the warming drawer. When installing below a Thermador Professional Rangetop, a minimum 2 3/4" air gap must be maintained between the bottom of the cooktop and the top of the warming drawer. Refer to the appropriate cooktop or rangetop section for additional details. CUSTOM FRONT PANEL (OPTIONAL) This Thermador Warming Drawer may be installed with an optional custom front panel. The panel should be built to the specifications noted. The cabinet base must be flat and capable of supporting a weight of at least 110 lbs. (50 kg). WARMING DRAWER 27-INCH TRADITIONAL Model: WD27ES 27-INCH TRADITIONAL WARMING DRAWER AND CUTOUT DIMENSIONS 1" minimum space is recommended between the bottom of the oven and the top of the Warming Drawer, if the Warming Drawer is installed below a single oven. CUSTOM FRONT PANEL (OPTIONAL) Custom Drawer Front Dimensions Build custom drawer front to the dimensions specified below. All four edges must be finished. If using wood, the back must be sealed to prevent moisture damage. 1 5/8" 26 3/4" 21 1/2" 2 5/8" Pilot Holes 11 1/4" 1/2" (12.7 mm) Diameter Hole 3 5/8" 2 3/16" 1.800.735.4328 | THERMADOR.COM 193