Thermador WD30EP Design Guide - Warming Drawers - Page 4

WARMING DRAWERS WARMING DRAWERS PLANNING INFORMATION MODEL OPTIONS Thermador Warming Drawers are available in 27-inch, 30-inch and 36-inch widths to fit your kitchen plans perfectly. There are two series to choose from- Professional and Masterpiece®. Each series features a distinctive style. You may choose from traditional warming drawers or convection warming drawers. Convection warming drawer units may be installed with your own custom front panel or with one of our coordinating front panels. Be sure to reference the correct model information in this design guide. INSTALLATION CONSIDERATIONS The information in this design guide provides key features, product dimensions, cutouts and installation specifications. Before installing a Thermador Warming Drawer, be sure to verify the cabinet dimensions and electrical connections. Also, always consult with the installation manual packed with the product for complete details before installing. Thermador Warming Drawers may be installed below any Thermador Single or Double Built-in Oven. A minimum space of 1" is recommended between the bottom of the oven and the top of the warming drawer. Refer to the built-in oven section for additional details. Thermador Warming Drawers may also be installed below any Thermador Electric or Non-professional Gas Cooktop as long as there is no contact between the bottom of the cooktop and the top of the warming drawer. When installing below a Thermador Induction Cooktop, a minimum 1" air gap must be maintained between the bottom of the cooktop and the top of the warming drawer. When installing below a Thermador Professional Rangetop, a minimum 2 3/4" air gap must be maintained between the bottom of the cooktop and the top of the warming drawer. Refer to the appropriate cooktop or rangetop section for additional details. WARRANTY Limited warranty parts and labor (1 year) See page 294 for additional warranty details. ELECTRICAL SPECIFICATIONS Be sure your appliance is properly installed and grounded by a qualified technician. Installation, electrical connections and grounding must comply with all applicable local codes. All Thermador Warming Drawers are designed to be connected to a 120V AC, 60 Hz, three-prong, grounded outlet. MODEL WD27ES WD30ES WD30EP WDC30E WDC36E REQUIRED CIRCUIT BREAkER 120V, 60Hz 15 Amp 15 Amp 15 Amp 15 Amp 15 Amp ELECTRICAL LOCATION The outlet can be installed in the backwall directly behind the drawer. 1.800.735.4328 | THERMADOR.COM 191