TomTom GO 920 User Guide - Page 4
Before you start..., Switching on and off, Setting up, Battery notes, Improving reception
UPC - 636926018319
View all TomTom GO 920 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
2. Before you start... Before you start... Switching on and off To switch your TomTom GO on or off, press and hold the On/Off button for 2 seconds. The first time you switch on, it may take a short while for your device to start. Note: In rare cases, your GO may not start correctly. If this happens, press the reset button, then switch on the device again. Setting up To set up your TomTom GO you need to answer a few questions by tapping the screen. Important: Take care to select the correct language, since the language you choose will be used for all menus and written instructions. Battery notes We recommend that you fully charge your TomTom GO the first time that you connect it to the Home dock. It takes up to 2 hours to charge the battery completely. When you place your GO in the Home dock, you are asked if you wish to connect to the computer. If you select No, the device will switch off if you do not tap the screen for three minutes. This happens so that the battery can recharge at a faster rate. For information on connecting your computer, see Using TomTom HOME (89). Note: Your TomTom GO uses a small amount of battery power to remember the last screen being shown when the device is switched off. If you do not charge your GO for a prolonged period of time, the next time you start your GO it will show the default starting screen. All other device settings will still be maintained. Improving reception If your TomTom GO takes longer than 5 minutes to find your current position, make sure that the device is in an open space away from tall objects, such as buildings or trees. 4