Toro 20332 Operation Manual - Page 10

lever forward until the button on the lever pops up (Figure 15) Figure 15 1. Bag-on-demand lever (in bagging position) 1. Notches 2. Rear deflector Figure 14 3. Grass bag pin (2) 2. Install the grass bag, ensuring that the pins on the bag rest in the notches on the handle (Figure 14). 3. Lower the rear deflector. Removing the Grass Bag To remove the bag, reverse the steps above. Operating the Bag-on-Demand Lever The bag-on-demand feature allows you to either collect or recycle grass and leaf clippings while the grass bag is attached to the mower. • For bagging the grass and leaf clippings, press the button on the bag-on-demand lever and move the • For recycling the grass and leaf clippings, press the button on the lever and move the lever rearward until the button on the lever pops up. Important: For proper operation, remove any grass clippings and debris from the bag-on-demand door and the surrounding opening (Figure 16) before you move the bag-on-demand lever from one position to another. WARNING The blade is sharp; contacting the blade can result in serious personal injury. Also, an open rear discharge area could allow small stones and other similar debris to be thrown in the operator's or bystander's direction and result in serious personal injury or death to the operator or bystanders. Stop the engine and wait for all moving parts to stop before cleaning the bag-on-demand door and the surrounding opening. 10