Toshiba 20DL75 User Manual - Page 9

Rear terminal cover, Cable clamper, Adjusting the TV viewing angle

Page 9 highlights

Connecting your TV Using the Remote Control E Rear terminal cover F The connection panel is hidden behind the terminal cover. S 1. Remove the cover. Release the three hooks on the bottom of the cover. 2. Install cables as necessary. 3. Reinstall the cover. Align the holes on the TV back with the two tabs on the rear terminal cover as shown. 4. Close the cover. Introduction Cable clamper The cable clamper can be used to bundle the connection cables (see page 10). WARNING: RISK OF SERIOUS PERSONAL INJURY OR EQUIPMENT DAMAGE ! Never grasp the cable clamper when moving or lifting the TV. The cable clamper could break, causing the TV to fall. Cable clamper Adjusting the TV viewing angle You can adjust the angle of the TV screen. Swivel angle Tilt angle Setting up your TV Using the TV's Features Appendix Index 9

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

E
S
F
Connecting
y
our TV
Using the
Remote Control
Setting up
y
our TV
Using the TV’s
F
eatures
Appendix
Index
Introduction
9
Rear terminal cover
The connection panel is hidden behind the terminal cover.
1.
Remove the cover. Release the three hooks on the bottom
of the cover.
2.
Install cables as necessary.
3.
Reinstall the cover. Align the holes on the TV back with the
two tabs on the rear terminal cover as shown.
4.
Close the cover.
Cable clamper
The cable clamper can be used to bundle the connection cables
(see page 10).
Cable clamper
Adjusting the TV viewing angle
You can adjust the angle of the TV screen.
Swivel angle
Tilt angle
WARNING: RISK OF
SERIOUS PERSONAL
INJURY OR EQUIPMENT
DAMAGE !
Never grasp the cable clamper when
moving or lifting the TV. The cable clamper
could break, causing the TV to fall.