Toshiba 24AF46 User Manual - Page 13
Adding channels to the TV, s memory, Changing channels
View all Toshiba 24AF46 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Important Safeguards Welcome to Toshiba Connecting your TV Using the Remote Control Adding channels to the TV's memory When you press CH +/- on the remote control or CHANNEL L/M on the TV front panel, your TV will stop only on the channels stored in the TV's channel memory. Follow the steps below to program channels into the memory. Programming channels automatically Your TV can automatically detect all active channels and store them in its memory. After the TV has stored the channels in its memory automatically, you can add or erase specific channels manually. To add channels automatically: 1. Press MENU, then press a or b to display the SETUP menu. 2. Press c or d until the TV/CABLE selection is highlighted. 3. Press a or b to highlight either TV or CABLE, depending on which CH PICTURE AUDIO SETUP OPTION you use. TV / CABLE TV CABLE CH PROGRAM START If you use an antenna, choose TV. ADD / ERASE ADD If you use cable, choose CABLE. SELECT ADJUST 4. Press d to select CH PROGRAM. 5. Press a or b to start channel programming. The TV will automatically cycle through all the TV or Cable channels (depending on which you selected), and store all active channels in the channel memory. While the TV is cycling through the channels, the message "PROGRAMMING NOW-PLEASE WAIT" appears. 6. When channel programming is complete, the message "COMPLETED" appears. 7. Press CH + or - to view the programmed channels. Adding and erasing channels manually After you have programmed the channels automatically, you can add or erase specific channels manually. To add or erase channels manually: 1. Select the channel you want to add or erase. If you are adding a channel, you must select the channel using the Channel Number buttons. 2. Press MENU, then press a or b to display the SETUP menu. CH 3. Press c or d to highlight ADD/ PICTURE AUDIO SETUP OPTION ERASE. TV / CABLE CABLE 4. Press a or b to select ADD or ERASE, whichever function you CH PROGRAM START ADD / ERASE ADD ERASE want to perform. 5. Repeat steps 1-4 for other SELECT ADJUST channels you want to add or erase. Changing channels To change to the next programmed channel: Press CHANNEL L/M on the TV front panel or CH +/- on the remote control. To change to a specific channel (programmed or unprogrammed): Press the Channel Number buttons (0-9 and 100) on the remote control. For example, to select channel 125, press 100, 2, 5. Channel Numbers Channel +/- cd ab Menu Setting up your TV Using the TV's Features Appendix J3M61021A(E)_P07-13 13 13 12/1/06, 10:03 AM