Toshiba 32A33 Owners Manual - Page 16

Setting up your TV Changing the on-screen display language You can choose from three different languages (English, French, or Spanish) for the on-screen display of menus and messages. To select an on-screen display language: 1. Press MENU. 2. Press x or • until the SET UP menu appears. 3. Press y or z to highlight LANGUAGE. 4. Press x or • to highlight your desired language. TV Front Panel TV/VIDEO CHANNEL s/t MENU TV/VIDEO VOLUME CHANNEL POWER MENU T S ts SET UP LANGUAGE: [ENGLISH] FRANCAIS ESPANOL TV/CABLE: CH PROGRAM ADD/ERASE: V-CHIP CONTROL MORE [TV] CABLE [ADD] ERASE MOVE [ ] SELECT [ ] CONFIGURATION LANGUE: ENGLISH [FRANCAIS] ESPANOL TV/CABLE: [TV] CABLE PROGRAMME CAN AJOUT/EFF: [AJOUT] EFF CONTROLE V-CHIP PLUS BOUGER [ ] CHOISIR [ ] Selecting the signal source You can use the TV/VIDEO button on the remote control or TV to select the signal source connected to your TV. To change the signal source: Repeatedly press TV/VIDEO to select either TV, VIDEO 1, VIDEO 2, or VIDEO 3 (32A43 and 36A43 only). The selected signal source is highlighted on-screen. TV VIDEO 1 VIDEO 2 TO SELECT PUSH TV/VIDEO 32A33 To verify the signal source: Press RECALL. TV VIDEO 1 VIDEO 2 VIDEO 3 TO SELECT PUSH TV/VIDEO 32A43 and 36A43 Programming channels into the TV's memory When you press CHANNEL ▲▼ on the TV or remote control, the TV stops only on the channels stored in the TV's memory. Note: To tune the TV to a channel not programmed into the memory, use the CHANNEL NUMBERS on the remote control. Follow the steps below and on the next page to program channels into the TV's memory. Programming channels automatically Your TV can automatically detect all active channels in your area and store them in the TV's memory. After the channels are stored automatically, you can manually add or erase individual channels (see page 17). To program channels automatically: 1. Press MENU. 2. Press x or • to highlight the SET UP menu. RECALL TV/VIDEO } Channel Numbers MENU } stT S CHANNEL yz 16