Toshiba 32A33 Owners Manual - Page 7

Introduction Connecting your TV Using the Remote Control Setting up your TV Connecting your TV Note: Cables are not supplied with your TV. Coaxial cable is the cable that comes in from your antenna, cable TV service, or cable converter box. Coaxial cable uses "F" connectors. Standard stereo A/V cables usually come in sets of three, and are typically color-coded according to use: yellow for video, red for stereo right audio, and white for stereo left (or mono) audio. Your TV's standard A/V inputs are color-coded in the same manner as the cables. S-Video cable is for use with video equipment that has S-Video connectors. Component video cables come in sets of three (typically color-coded green, blue, and red), and are for use with video equipment that has component video connectors. Your TV's ColorStream® (component video) inputs are color-coded yellow, blue, and red. Plug the green component video cable into the yellow VIDEO-2 input (see "Back of TV" on page 6). Coaxial (antenna) cable Standard stereo A/V cables (typically color-coded yellow for video, red and white for audio) NOTE REGARDING PICTURE QUALITY When connecting video equipment to your Toshiba TV: For GOOD picture quality: Use a standard yellow video cable. For BETTER picture quality: If your equipment has S-video connectors, use an S-video cable instead of a standard yellow video cable. You still must connect the standard red and white audio cables for full system connection, but do not connect a standard yellow video cable at the same time or the picture performance will be unacceptable. For BEST picture quality: If your equipment has component video connectors, use component video cables instead of a standard yellow video cable or S-video cable. You still must connect the standard red and white audio cables for full system connection. S-video cable Component video cables (typically color-coded red, green, blue) CAUTION: Do not plug in any power cords until you have finished connecting all equipment. Connecting a VCR With this connection you can: • watch local TV channels and videotapes • record one channel while watching the same or another channel You will need: • two coaxial cables • one set of standard A/V cables (If your VCR has S-video, you can use an S-video cable instead of the standard video cable. See "Note Regarding Picture Quality" above.) Note: If you have a mono VCR, connect L/Mono to VCR Audio OUT using only one audio cable. The VIDEO-2 inputs on the back of the TV can be used for connecting a second piece of video equipment such as a DVD player. The VIDEO-3 inputs* on the front of the TV can be used for connecting a third piece of video equipment such as a camcorder. See "Note Regarding Picture Quality" above. ________ *Model 32A33 does not have VIDEO 3 inputs. From cable or antenna Stereo VCR S-VIDEO VIDEO OUT L R IN OUT IN from ANT OUT to TV CH3 CH4 TV VIDEO L/ MONO S-VIDEO AUDIO IN COLOR VIDEO STREAM INPUT Y L AUDIO PB OUT ANT VIDEO L/ MONO AUDIO R R R VIDEO-1 VIDEO-2 PR Connecting a cable converter box With this connection you can: • watch basic and premium cable channels Tune the TV to channel 3 or 4 (whichever channel is vacant in your area), and then use the cable converter box to change channels. You will need: • two coaxial cables Note: When you use a cable converter box with your TV, you may not be able to use the remote control to program certain features (for example, blocking channels). From cable TV IN OUT VIDEO Cable converter box L/ MONO S-VIDEO AUDIO IN COLOR VIDEO STREAM INPUT Y L AUDIO PB OUT ANT VIDEO L/ MONO AUDIO R R R VIDEO-1 VIDEO-2 PR The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Using the TV's Features Appendix 7