Toshiba 32AV500U Owner's Manual - English - Page 5
Choosing a location for your LCD TV
UPC - 022265001141
View all Toshiba 32AV500U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Choosing a location for your LCD TV To Display your LCD TV on the included Pedestal Stand: Observe the following safety precautions: 1) Read and Follow the pedestal assembly instructions. CAUTION: Before beginning pedestal assembly, carefully lay the front of the LCD Panel face down on a flat, cushioned surface such as a quilt or blanket. Leave the bottom of the unit protruding over the edge of the surface and assemble the pedestal as indicated below. Note: Extreme care should always be used when attaching the pedestal stand to avoid damage to the LCD panel. 2) Place the TV on a sturdy, level surface that can support the weight of the TV. 3) Be sure to secure the TV to a wall, pillar, surface, or other immovable structure. ( item 20, page 3). To Display your LCD TV using a Wall Bracket: If you decide to wall mount your LCD TV, always use a ULlisted wall bracket appropriate for the size and weight of the LCD TV ( page 2) : 1) CAUTION: Two people are required for installation. 2) Unplug and remove any cables and/or other component connectors from the rear of the TV. 3) Follow the instructions provided with your wall bracket. Before proceeding, make sure the appropriate bracket(s) are attached to the wall and the back of the TV as described in the instructions provided with the wall bracket. 4) Remove the screws of the VESA Mounting Pattern show in the right diagram. 5) After attaching the appropriate bracket(s) to the wall and the back of the TV, remove the pedestal stand from the TV as described below. 6) VESA Mounting Pattern TV Size Hole Pattern(VxH) Screw Size 26" 100x200 mm M4 32"/ 37"/ 42" 200x400 mm M6 (unit in mm) Removing the Pedestal Stand 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand protruding over the edge of the surface. Note: Extreme care should always be used when removing the pedestal stand to avoid damage to the LCD panel. 2) Remove the screws shown in the right diagram . This will allow removal of the pedestal stand. 3) Once you have removed all screws holding the pedestal stand in place, remove the pedestal stand from the TV. 26" TV Four screws 32"/ 37" TV Four screws 42" TV Six screws VESA Mounting Pattern VESA Mounting Pattern VESA Mounting Pattern