Toshiba 36AF61 Owners Manual - Page 9

Welcome to Toshiba Connecting your TV Using the Remote Control Connecting a DVD player or satellite receiver and a VCR This connection allows you to watch DVD/satellite, VCR, or TV programs. You can record from the DVD player/satellite receiver or TV. You can also record one TV channel while watching another channel. Note: If your DVD player has component video connections, follow the connection instructions under "Connecting a DVD player with ColorStream™ (component video) and a VCR" on page 10. You will need: • one coaxial cable • three pairs of audio cables (one pair and two single audio cables for a mono VCR) • two regular video cables • one S-video cable DVD / Satellite Receiver VIDEO OUT AUDIO OUT L R To Satellite Satellite IN S VIDEO To Antenna Stereo VCR ANT (75Ω) ANT-1 OUT ANT-2 OUT VIDEO L/MONO AUDIO R DVD IN COLOR STREAM INPUT Y L Pb AUDIO Pr R IN S-VIDEO VIDEO L/MONO AUDIO VIDEO 2 R VIDEO 1 VIDEO IN OUT AUDIO L R IN from ANT OUT to TV CH 3 CH 4 Note: You can use a regular video cable instead of an S-video cable between the TV and DVD player/satellite receiver, but the picture quality will decrease. The illustration at left shows one S-video cable and one pair of audio cables connected from the DVD player/satellite receiver to Video-1 on the TV. Do not connect a regular video cable and an S-video cable to Video-1 (or Video-2) at the same time. Doing so will distort the picture. When recording, set Audio Out to FIX (see "Selecting variable audio OUT" on page 35). With Audio Out set to FIX, the TV's volume setting during recording will not affect the sound level being recorded. Setting up your TV Using the TV's Features Appendix Index Reference 9