Toshiba 40L5200U2 User Guide - Page 120
CableClea, al Noise Reduc, MPEG Noise Reduc
View all Toshiba 40L5200U2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
120 Using the TV's Advanced Features Using the advanced picture settings CableClear® digital Noise Reduction The CableClear® digital Noise Reduction feature allows you to reduce visible interference in your TV picture. This may be useful when receiving a broadcast with a weak signal (especially a Cable channel) or playing a noisy video cassette or disc. To change the CableClear settings: 1 Press the MENU button and open the Picture menu. 2 Highlight Noise Reduction, and then press the ENTER button. 3 In the CableClear field, select the desired setting. The available selections are Off, Low, Middle, and High. Low, Middle, and High will reduce the noise in varying degrees, from lowest to highest, respectively. NOTE If the current input is ANT/CABLE or VIDEO, the menu will display the text "CableClear". If the current input is ColorStream® HD, HDMI 1 HDMI 2, or HDMI 3, the menu will display the text "DNR". 4 To save your new settings, highlight Done, and then press the ENTER button. To revert to your original settings, highlight Reset, and then press the ENTER button. MPEG Noise Reduction The MPEG Noise Reduction feature allows you to reduce visible interference caused by MPEG compression. Choices for MPEG Noise Reduction are Off, Low, Middle, and High. Off is automatically selected when this feature is disabled ("grayed out"). To select the MPEG Noise Reduction level: 1 Press the MENU button and open the Picture menu. 2 Highlight Noise Reduction, and then press the ENTER button. 3 Press the ( / arrow) buttons to highlight the MPEG Noise Reduction field, and then press the ( / arrow) buttons to select either Off, Low, Middle, or High. 4 To save your new settings, highlight Done, and then press the ENTER button. To revert to your original settings, highlight Reset, and then press the ENTER button.