Toshiba 51H93 Owner's Manual - English - Page 17

Chapter 2: Connecting your TV Connecting two VCRs You will need: two coaxial cables two sets of standard A/V cables • For better picture performance, if VCR 1 has S-video, use an S-video cable (plus the audio cables) instead of the standard video cable. However, do not connect both types of video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. • If VCR 1 has mono audio, connect L/MONO on the TV (VIDEO 1) to the audio out jack on VCR 1 using the white audio cable only. • Do not connect the same VCR to the output and input jacks on the TV at the same time. To view the antenna or Cable signal: Turn OFF the VCR. Select the ANT-1 video input source.* • If you have both an off-air antenna and Cable TV, connect the antenna to ANT-2 and the Cable TV to ANT-1 (ANT-1 and VIDEO 1 are the only sources for the TV Guide On Screen program guide). To view VCR 1: Select the VIDEO 1 video input source.* To dub or edit from VCR 1 to VCR 2: VCR 2 must select "line IN." Select the VIDEO 1 video input source.* Note: If you have a Cable box, connect the Cable box and splitter to VCR1 as shown on page 13. From VCR1 (plays) antenna or Cable IN from ANT CH 3 CH 4 OUT to TV VIDEO AUDIO L R IN L R OUT LR Connect the IR blaster cable to the G-LINK jack (see page 25) TV ANT( 75 ) ANT-1 ANT-2 REC OUT G-LINK DVI/HDCP IN TheaterNet IEEE1394 1 IEEE1394 2 VIDEO L R AUDIO IN VIDEO 1 VIDEO 2 COLOR STREAM HD-1 COLOR STREAM HD-2 S-VIDEO Y Y AUDIO R L VIDEO L/ MONO AUDIO R PB PB PR PR L L AUDIO AUDIO R R OUT VIDEO L/ MONO AUDIO R a AUDIO CENTER CHANNEL IN L b VAR AUDIO ON OFF R DIGITAL AUDIO OUT TheaterNet IR OUT VCR2 (records) IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN L R OUT LR a The Video OUT jack does not output the POP picture. b The AUDIO OUT jacks can output the sound of either the Main or POP picture (see "Selecting the AUDIO OUT sound" on page 79). Connecting a VCR to the REC OUT jacks If you connect an ATSC antenna or digital Cable service to ANT 1 or ANT 2, or a digital device to one of the IEEE-1394 ports, you can use From ATSC antenna or digital Cable TV ANT( 75 ) G-LINK DVI/HDCP IN TheaterNet the REC OUT jacks to record down-converted programs to an analog ANT-1 ANT-2 IEEE1394 1 IEEE1394 VCR. REC OUT 2 Note: • The REC OUT jacks only output down-converted signals from an ATSC, digital Cable, or IEEE-1394 source in an analog signal format. • For the best possible audio/video performance, when using an ATSC, digital Cable, or IEEE-1394 source, it is recommended that you use the REC OUT jacks (instead of A/V OUT or VAR AUDIO OUT) to connect to an external A/V system. VIDEO L R AUDIO IN VIDEO 1 VIDEO 2 COLOR STREAM HD-1 COLOR STREAM HD-2 S-VIDEO Y Y AUDIO R L VIDEO L/ MONO AUDIO R PB PB PR PR L L AUDIO AUDIO R R OUT VIDEO L/ MONO AUDIO R AUDIO CENTER CHANNEL IN L VAR AUDIO ON OFF R DIGITAL AUDIO OUT TheaterNet IR OUT • This connection cannot be used for timed recordings. • Because of copy protection requirements, the REC OUT jacks may be blocked during playback of some IEEE-1394 content. • See "Using the digital tuner hold" on page 61. You will need: one set of standard A/V cables one coaxial cable To select the video input source, press INPUT on the remote control (see page 61). To program the TV remote control to operate other devices, see pages 30 to 33. VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN L R OUT LR The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Copyright © 2003 TOSHIBA CORPORATION. All rights reserved. 17