Toshiba 57HX94 Owners Manual - Page 15
Connecting a VCR and satellite receiver
View all Toshiba 57HX94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 2: Connecting your TV Connecting a VCR and satellite receiver Note: The TV Guide On Screen® system does not receive program listings from or for any satellite service. You will need: three coaxial cables one set of component video cables (if your satellite receiver does not have component video, connect the standard A/V cables only) three sets of standard A/V cables • For better picture performance, if your satellite receiver and VCR have S-video, connect S-video cables (plus the audio cables) instead of the standard video cables. Do not connect both types of video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. • If you have a mono VCR, connect L/MONO on the TV (VIDEO 1) to your VCR's AUDIO OUT jack using the white audio cable only. To view satellite programs using the component video connections: Select the ColorStream HD-1 video input source on the TV.* To view satellite programs using the standard From antenna From satellite dish video connections or to record satellite programs: Turn on all three devices. Set the VCR to the appropriate line input (refer to your VCR owner's manual for details). Select the VIDEO 2 video input source on the TV.* To view the VCR or view and record antenna channels: Turn ON the VCR. Select the ANT-1 video input source on the TV.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area). or... Turn ON the VCR. Tune the VCR to the channel you want to watch. Select the VIDEO 1 video input source on the TV.* To select the video input source, press INPUT on the remote control (see page 67). To program the TV remote control to operate other devices, see Chapter 3. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. Stereo VCR IN from ANT OUT to TV CH 3 CH 4 VIDEO AUDIO L R IN L R OUT LR TV OUT 1 VIDEO 1 VIDEO 2 S-VIDEO S-VIDEO COLOR COLOR STREAM STREAM HD-1 HD-2 Y Y IN AUDIO R L 2 OUT 2 TheaterNet VIDEO L/ MONO AUDIO R PB VIDEO PR L/ MONO L AUDIO AUDIO RR PB 1 VIDEO PR L/ L MONO AUDIO R AUDIO R VAR AUDIO L R TheaterNet IEEE1394 1 2 HDMI IN 2 1 G-LINK EJECT CableCARD™ ANT1 (CABLE) ANT2 ANT (75 ) IN OUT DIGITAL AUDIO OUT Satellite IN S-VIDEO OUT Y PB PR COMPONENT VIDEO VIDEO OUT Satellite receiver AUDIO L OUT L R R Note: The VIDEO/AUDIO OUT jacks output the signals from the ANT 1, ANT 2, VIDEO 1, VIDEO 2, or VIDEO 3 jacks when the appropriate input mode is selected. To use the TV Guide On Screen recording features: 1. Connect the G-LINK cable according to the instructions on page 25. 2. Make sure the VCR is connected to the A/V OUT jacks on the TV (see illustration). 3. Set the VCR to the appropriate line input (refer to your VCR owner's manual for details), and then turn OFF the VCR. 4. See Chapter 5 for details on setting up the TV Guide On Screen system. 5. See Chapter 7 for details on using the TV Guide On Screen system. 51,57HX94(E)012-25 15 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 9/12/04, 7:01 PM 15