Toshiba 57HX94 Owners Manual - Page 16
Connecting a DVD player with S-video, a VCR, and a Cable box
View all Toshiba 57HX94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Chapter 2: Connecting your TV Connecting a DVD player with S-video, a VCR, and a Cable box You will need: five coaxial cables two sets of standard A/V cables Note: If you have a mono VCR, connect L/MONO on the TV (VIDEO 1) to your VCR's audio out jack using the white audio cable only. one S-video cable one pair of standard audio cables Note: • If your DVD player does not have S-video, use a standard video cable instead. Do not connect an S-video cable and a standard video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. • If your DVD player has component video, see page 17. • Do not connect the DVD player and VCR to the same set of A/V inputs on the TV. (See the illustration, which shows the VCR connected to VIDEO 1 on the TV, and the DVD player connected to VIDEO 2.) To view basic channels and access the TV's features: Select the ANT 2 video input source.* Use the TV controls to change channels and access the TV's features. To view premium Cable channels: Turn OFF the VCR. Select the ANT 1 video input source.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area). Use the Cable box controls to change channels. or...Turn ON the VCR. Tune the VCR to channel 3 or 4 (whichever channel is vacant in your area). Select the VIDEO 1 video input source.* Use the Cable box controls to change channels. Note: When you use a Cable box, you may not be able to use the remote control to program or access certain features on the TV. To view the DVD player: Turn ON the DVD player. Select the VIDEO 2 video input source.* To view VCR 1: Turn ON the VCR. Select the VIDEO 1 video input source on the TV.* or...Turn ON the VCR. Select the ANT 1 video input source.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area). To select the video input source, press INPUT on the remote control (see page 67). To program the TV remote control to operate other devices, see Chapter 3. From antenna or Cable TV Cable box OUT CH 3 IN CH 4 Stereo VCR Cable splitter IN OUT OUT IN from ANT OUT to TV TV CH 3 CH 4 VIDEO AUDIO LR IN OUT LR OUT 1 VIDEO 1 VIDEO 2 S-VIDEO S-VIDEO COLOR COLOR STREAM STREAM HD-1 HD-2 Y Y IN AUDIO R L 2 OUT 2 TheaterNet VIDEO L/ MONO AUDIO R PB VIDEO PR L/ MONO L AUDIO AUDIO RR PB 1 VIDEO PR L/ L MONO AUDIO R AUDIO R VAR AUDIO L R TheaterNet IEEE1394 1 2 HDMI IN 2 1 G-LINK EJECT CableCARD™ ANT1 (CABLE) ANT2 ANT (75 ) IN OUT DIGITAL AUDIO OUT S-VIDEO OUT VIDEO OUT DVD player with S-video AUDIO OUT L R Note: The VIDEO/AUDIO OUT jacks output the signals from the ANT 1, ANT 2, VIDEO 1, VIDEO 2, or VIDEO 3 jacks when the appropriate input mode is selected. To enable the TV Guide On Screen system to work with your cable box and to use the TV Guide On Screen recording features: 1. Connect the G-LINK cable according to the instructions on page 25. 2. Make sure the VCR is connected to the A/V OUT jacks on the TV (see illustration). 3. Set the VCR to the appropriate line input (refer to your VCR owner's manual for details), and then turn OFF the VCR. 4. See Chapter 5 for details on setting up the TV Guide On Screen system. 5. See Chapter 7 for details on using the TV Guide On Screen system. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 16 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 51,57HX94(E)012-25 16 9/12/04, 7:01 PM