Toshiba 57HX94 Owners Manual - Page 17
Connecting a DVD player with ColorStream, component video and a VCR
View all Toshiba 57HX94 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 2: Connecting your TV Connecting a DVD player with ColorStream® (component video) and a VCR Your TV has ColorStream® (component video) inputs. Connecting a DVD player with component video output (such as a Toshiba DVD player with ColorStream®) can greatly enhance picture quality. You will need: two coaxial cables two sets of standard A/V cables • For better picture performance, if your VCR has S-video, use an S-video cable (plus the audio cables) instead of the standard video cable. However, do not connect both types of video cable to VIDEO 1 (or VIDEO 2) at the same time or the picture performance will be unacceptable. • If you have a mono VCR, connect L/MONO on the TV (VIDEO 1) to your VCR's audio out jack using the white audio cable only. one pair of standard audio cables one set of component video cables • You can connect the component video cables (plus audio cables) from the DVD player to either set of ColorStream jacks on the TV (HD-1 or HD-2). The ColorStream HD-1 and HD-2 jacks can be used with Progressive (480p, 720p) and Interlaced (480i, 1080i) scan systems. A 1080i signal will provide the best picture performance. • If your DVD player does not have component video, see page 16. If your DVD player has HDMI video, see page 19. To view antenna or Cable channels: Turn OFF the VCR. Select the ANT 1 video input source on the TV.* To view the DVD player: Turn ON the DVD player. Select the ColorStream HD-1 video input source on the TV.* To view the VCR: Turn ON the VCR. Select the VIDEO 1 video input source on the TV.* or...Turn ON the VCR. Select the ANT 1 video input source.* Tune the TV to channel 3 or 4 (whichever channel is vacant in your area). To record a TV program while watching a DVD: Turn ON the VCR. Tune the VCR to the channel to record. Select the ColorStream HD-1 video input source on the TV* to view the DVD. To select the video input source, press INPUT on the remote control (see page 67). To program the TV remote control to operate other devices, see Chapter 3. From antenna or Cable Stereo VCR IN from ANT OUT to TV CH 3 CH 4 TV VIDEO AUDIO LR IN OUT LR OUT 1 VIDEO 1 VIDEO 2 S-VIDEO S-VIDEO COLOR COLOR STREAM STREAM HD-1 HD-2 Y Y IN AUDIO R L 2 OUT 2 TheaterNet VIDEO L/ MONO AUDIO R PB VIDEO PR L/ MONO L AUDIO AUDIO RR PB 1 VIDEO PR L/ L MONO AUDIO R AUDIO R VAR AUDIO L R TheaterNet IEEE1394 1 2 HDMI IN 2 1 G-LINK EJECT CableCARD™ ANT1 (CABLE) ANT2 ANT (75 ) IN OUT DIGITAL AUDIO OUT Y PB PR S-VIDEO COMPONENT VIDEO OUT VIDEO OUT DVD player with component video AUDIO OUT L R Note: The VIDEO/AUDIO OUT jacks output the signals from the ANT 1, ANT 2, VIDEO 1, VIDEO 2, or VIDEO 3 jacks when the appropriate input mode is selected. To use the TV Guide On Screen recording features: 1. Connect the G-LINK cable according to the instructions on page 25. 2. Make sure the VCR is connected to the A/V OUT jacks on the TV (see illustration). 3. Set the VCR to the appropriate line input (refer to your VCR owner's manual for details), and then turn OFF the VCR. 4. See Chapter 5 for details on setting up the TV Guide On Screen system. 5. See Chapter 7 for details on using the TV Guide On Screen system. The unauthorized recording, use, distribution, or revision of television programs, videotapes, DVDs, and other materials is prohibited under the Copyright Laws of the United States and other countries, and may subject you to civil and criminal liability. 51,57HX94(E)012-25 17 Copyright © 2004 TOSHIBA CORPORATION. All rights reserved. 9/12/04, 7:01 PM 17