Toshiba 61HX70 Owners Manual - Page 22

Introduction Connecting your TV Using the Remote Control Setting up your TV Learning about the remote control The buttons for operating the TV set only are described below. POWER turns the TV on or off SLEEP sets the TV to turn off at a specific time (page 45) LIGHT The initial press of the LIGHT button causes two actions: 1) enables the illumination mode 2) illuminates the keypad. Subsequent presses of the LIGHT button cause the Illumination mode to toggle between enabled and disabled. Any keypress illuminates the keypad for 5 seconds. If in programming mode, the keypad will remain lit for 10 seconds. When disabled, pressing the LIGHT button enables the illumination mode and lights the keypad. Channel Numbers (0-9, 100) allow direct access to channels (page 26) MODE cycles through the 6 device modes (TV, CABLE/SAT, VCR, DVD, AUDIO1, AUDIO2). The mode indicator will be turned off if the remote control has been left idle for more than 10 seconds. FAVORITE allows access to Multi-Window function (page 33) INFO allows access to Multi-Window function (page 33) MENU allows access to programming (page 23) ENTER sets programming menu information (page 23) yz x • selects or adjusts programming menus (page 23) (FAV) x • selects your favorite channels (page 28) VOL yz adjusts the volume level EXIT exits programming menus (page 23) CH yz cycles through programmed channels (page 26) CH RTN returns to the last viewed channel (page 28) RECALL displays on-screen information(page 50) MUTE mutes the sound (page 46) INPUT selects video input source (page 42) PIP Buttons allow access to PIP functions (page 31) PIP turns the PIP on or off PIP CH yz selects the PIP channels MULTI allows access to Multi-Window function STILL freezes the PIP SOURCE selects the PIP source LOCATE moves the PIP SWAP switches the PIP and main pictures 22 Downloaded from www.Manualslib.com manuals search engine Using the TV's Features Appendix Index