Toshiba BDX2500KU Owners Manual - Page 29

Customizing the Function Settings You can change the default settings to customize performance to your preference. General Operations 1. Press / to select Settings in home menu while in full stop mode, the Settings menu appears. 2. Press button, then use / button to select the setting options. 3. Press OK button. 4. Press or RETURN button to return to the previous menu. Home Menu Network IP Settings Link Status MAC Address IP Mode IP Address Subnet Mask Gateway Primary DNS Secondary DNS Link Down 00:23:18:75:b1:2b Dynamic 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Apply Cancel BD-ROM Settings Connected Info Quick Setup Display Audio Display HDMI Status Connected HDMI Preferred Format 1080p(HDMI) Resolution HDMI Auto TV Aspect 16:9 Pillarbox Film Mode Off Deep Color On Speaker A Language 2. Press / to select IP Mode, then press OK. 3. Press / to select an IP mode. You can select: • Off - Disables the network interface. • Manual - Lets you manually configure network settings, such as IP address, subnet mask, and gateway settings. • Dynamic - Uses DHCP to automatically obtain an IP address. 4. Press or RETURN to go to the previous menu. Function setup Settings menu items submenu display area Info Menu Network Connection Setting 1. Press / to select Network in stop mode, the network connection menu appears. Wired This menu displays the following information: • Software Version • Software Date • Netflix ESN 1. In the main menu of Settings, press button, then use / button to select Info to display the version information on software and hardware. 2. Press or RETURN to go to the previous menu. Wireless Performing Quick-Setup Network Test 2. Press button, then use / button to select the desired connection setting. 3. Press OK button. Note: The option Wireless appears only while a wireless LAN adapter is inserted into the USB slot. Configuring a wired Internet connection 1. Press / to select Wired, then press OK to confirm. The IP Settings screen appears. If the network connection is active, Link Up appears next to Link Status. If the network connection is not active, Link Down displays next to Link Status. 1. In the main menu of Settings, press button, then use / button to select Quick Setup, and then press OK to confirm. 2. Press OK to perform Quick Setup. To exit the setup menu: • Use button to highlight "No thanks. I'll go through the full setup menu later", and then press OK. • Or press button directly. 3. Follow the on-screen instructions to customize the following settings to your preference: • OSD Language Settings • Resolution • TV Aspect 4. After setting, press OK to confirm and exit the setup. 29