Toshiba D-RW2SU Owners Manual - Page 147

Introduction Connections Basic Setup Recording Playback Playback ■ The disc does not play. • No disc is inserted. • A blank disc is inserted. • The disc is upside down. Insert the disc with the labeled side facing up. • The disc is not correctly inserted. • The unit cannot play certain discs (such as a CDROM) (pages 9-10). • The region code on the DVD-Video does not match the unit (page 10). • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about two hours until the moisture evaporates (page 4). • If the disc was recorded on another recorder, the unit cannot play the disc if it was not finalized (page 51). ■ Playback image freezes for a second. • During the playback of two layered disc, picture may freeze for a moment when the 1st layer switches to the 2nd layer. This is not a malfunction. ■ The disc does not start playback from the beginning. • Resume play was activated (page 87). Press [STOP C] twice. • You have inserted a disc whose Title menu or DVD menu automatically appears on the TV screen when it is first insert. ■ The unit starts playing from the disc automatically. • The DVD-Video features an auto playback function. ■ Some functions such as Stop, Search, Fast / Slow reverse or Fast / Slow forward cannot be performed. • Depending on the disc, you may not be able to do some of the operations above. See the instruction manual supplied with the disc. ■ The language for the sound track cannot be changed. • Multilingual tracks are not recorded on the DVDVideo, DVD-R or DVD-RW being played. • The DVD-Video prohibits the changing of the language for the sound track. • Try changing the language using the DVD-Video's menu. ■ The subtitle language cannot be changed or turned off. • Multilingual subtitle are not recorded on the DVDVideo. • The DVD-Video prohibits changing of the subtitles. • Try changing the subtitle using the DVD-Video's menu. ■ The angles cannot be changed. • Multi-angles are not recorded on the DVD-Video being played. • The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up. • The DVD-Video prohibits changing angles. • Try changing the angle using the DVD-Video's menu. Recording/Timer Recording/Editing ■ The channel cannot be changed from the channel you are recording. • Set the TV's input to "TV". ■ Recording does not start immediately after you press [REC I]. • A new DVD-R or DVD-RW has been inserted. It takes a while for the unit to automatically format a DVD-RW. ■ Nothing was recorded even though you set the timer setting correctly. • There was a power failure during recording. • The unit's internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (pages 38-43). • Disconnect the AC power cord from the AC outlet, and connect it again. • The program contains copy protection signals that restricts copying. • The timer setting overlapped with another setting that has priority. ■ Recording does not stop immediately after you press [STOP C]. • It will take a few seconds for the unit to input disc data before recording can stop. ■ Timer Recording is not complete or did not start from the beginning. • The timer setting overlapped with another setting that has priority (page 67). • Disc space was not enough. EN 147 Editing Function Setup Others 0UIFST@6%JOEE