Toshiba D-VR4X Owners Manual - Page 29
Setting the screen
View all Toshiba D-VR4X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Various settings Setting the screen This section describes settings about the screen. Preparation: • Turn ON the TV and set it to the video input mode. • Select "AV SETUP 1" from "AV SETUP". For the pro- cedure, see steps 1 to 3 in "Using the SETUP MENU" on page 23. SETUP MENU TIMER REC SET S Y STTVE MS CSREETEUNP AV SSETTILULPMODE R E CL SI NEET1UIPN P U T CH SLEINTEU2PINPUT OTHER AV SETUP 1 4:3 Letter box A U T O M AT I C VIDEO VIDEO ENTER SELECT ENTER RETURN BACK SETUP END TV SCREEN You can select the TV screen size to suit the screen image. Select "TV SCREEN" and select screen size from the below. 4:3 Pan scan It displays a wide picture across the whole screen with left and right edges automatically cut off. 4:3 Letter box Select this mode when connecting to a conventional TV. When playing back a wide screen DVD disc, it displays a wide picture with black bands at the top and bottom of screen. 16:9 Select this mode when connecting to a wide-screen TV. A wide-screen picture is displayed in full size. NOTE: If the DVD disc is not formatted in the pan scan format, it displays a 4:3 aspect ratio. STILL MODE You can set the type of image displayed on the TV screen when the playback of the DVD is stilled. Select "STILL MODE" and select the image to be displayed from the below. AUTOMATIC The field still or frame still is automatically selected. (For normal use.) STILL BY FRAME The frame still is set. Note for the field still and frame still: (with 480i interlaced scanning mode) • Field* still (240 lines) Since only one field (half of the video information) is shown on the TV screen, the picture appears rough but does not shake. • Frame* still (480 lines) Two fields are alternatively shown on the TV screen. The picture shakes but the resulting picture quality is superior to the field still pictures. Field*: A field refers to the video information in onehalf of a frame. 1 frame (screen) consists of 2 fields. Frame*: A frame refers to the total area occupied by each picture on the TV screen. LINE1 INPUT/LINE2 INPUT This unit comes with an S-Video input jack and Video input jack. When you use an S-Video or Video input jack, you must select the input mode. Select "LINE1 INPUT" ("LINE2 INPUT") and select the mode from the below. S-VIDEO The Video signal is input only from the S-Video input jack. VIDEO The video signal is input only from the video input jack. 2G10101A P22-P32 29 2/25/05, 1:30 AM 29